HomeResourcesProceduresRadio Procedures

Radio Procedures

Security Radio Procedures

Maintaining a good radio etiquette is very important and speaks of your professionalism. Wheter a novice or not every security officer should take notice of the following guidelines and rules:

 

 

 

  1. Keep transmissions as short as possible.
  2. Restrict radio traffic to that which is necessary for the safe and efficient operation of the group.
  3. Begin and end each transmission with an identifier such as a name or a call which is understood by all radio operators in the group.
  4. Transmission of vulgar language and music are expressly forbidden.
  5. Do not use the radio for private "chit-chat" or horseplay.
  6. In a true emergency, any person is permitted to make an emergency transmission on any frequency.

 

Two-way radios are not like a telephone. Telephones and cell phones are "full-duplex" which means you can talk and listen at the same time.

Most two way radios are "simplex" which means you cannot hear anyone while you have the talk button pressed.

It is extremely important to take turns talking.

 

The single most important mistake people make is failing to identify themselves .
There may be several people using the same channel as you, so it’s important to know who you are directing your transmission to.

 

To call someone

, say the name of the person you want to call, followed by the words

" THIS IS " then say your name and " OVER"

Example: "Alpha1, THIS IS Delta 2, OVER.”

It's important to say the name of the person you want to contact before saying your name, as this will get their attention, and they will listen to the rest of your message.

The word " OVER " leaves no doubt about whose turn it is to talk and avoids any confusion. It's important to say " OVER ", so they know when you are done speaking.

Some radios beep when you're done transmitting, in which case you wouldn't need to say " OVER ", but it is still a good practice.

 

It's basic "radio etiquette" to establish contact and make sure that you have the other person's attention before you start your message. If you hear someone calling you, acknowledge his or her call by saying, "

GO AHEAD " or " STAND BY " This lets the caller know that you heard them. Also remember, it may take someone a while to get to their radio and respond. Be patient in waiting for a reply.

Because only one person can talk at a time , it is more important to LISTEN on a 2-way radio than to talk!

When your business is finished, the person who started the conversation should end it by saying their name and the word "

OUT ," which leaves no mistake that contact has ended.

Always release the push-to-talk ( PTT ) button whenever you stop talking. If you forget and keep it pushed down while you are trying to think of something to say, the radio continues to transmit, making your battery run down faster and making " dead air " so that nobody else can speak or be heard.

In the least sense, it is impolite. In an emergency, it could prevent someone with vital information from getting through. If you need to collect your thoughts, release the PTT so that somebody else can break in case they have an emergency, additional information or simply wants to join in the conversation.

Leave a second or two between "hand-offs" to give others a chance to break in

It is always best to speak in short simple phrases on the radio and toss the conversion back and forth with the word " OVER ."

Don't speak immediately when you press the PTT (push to talk), especially with digital radios which among all their benefits have slightly longer delay. Wait 2-3 seconds.

If you speak as soon you press the PTT button, it can chop off your the first syllable or word, making you hard to understand. If that word doesn't make it, you will just have to say it again and run down your batteries faster.

Go to top